User's Manual

Chapter1 Introduction
Thank you for purchasing KCodes 601/601n/604/604n USB Device Server (in the
following referred to as “Server”). This Server is designed to connect your
Multifunction Printer, Scanner, Fax, Multifunction Printer, Hard Drive, iPhone, iPod,
USB Digital TV Tuner, Digital Camera, USB Webcam, USB Speaker, USB CD, USB DVD
to your network, allowing all network users’ access to these shared USB devices.
*Note: For the USB devices with 3G network card, KCodes 601/601n/604/604n USB Device Server only
support the function of accessing storage files; 3G network card function not supported
.
1.1 About 4 Models Described in this Manual
This manual provides introductory information as well as detailed instructions on how
to set up and manage KCodes 601/601n/604/604n in various network environments.
The following table shows the differences among the 4 models. All 4 models have a
10/100 Mbit/sec Lan port. However, 601/601n has only one USB port, while both 604
and 604n have four USB ports. Compared with 601/604, 601n/604n have an
additional wireless module (802.11b/g). Except for the wireless configuration, most
configuration and operations are the same for KCodes 601/604 and KCodes
601n/604n. Similarly, almost all of the configuration and operations are the same for
these models except that only one USB device can be connected to KCodes 601/601n
while at most four USB devices can be connected to KCodes 604/604n. Unless
explicitly specified, all instructions in the manual apply to KCodes 601, 601n, 604, and
604n.
Model LAN Wireless
USB Port(s)
KCodes 601 Yes No 1
KCodes 604 Yes No 4
KCodes 601n Yes Yes 1
KCodes 604n Yes Yes 4
To fully benefit from this document, you should be familiar with basic networking
principles. The instructions described in this manual are based on the settings in a new
Server. To reload the Factory Parameters, you can reset this Server back to Factory
Default, which will restore most of the settings. For details, please refer to the chapter
“Restore Factory Defaults”.
1.2 Customer Support
Should you require any technical assistance, please contact your product reseller. Or
you can visit our website at http://www.kcodes.com
for latest product information.
This document is subject to changes without prior notice.