User's Manual

Chapter7 Restore Factory Defaults

You may restore the Server’s default parameters by one of the following methods.

7.1 Using the Server’s Web Pages

1. Go to the Server’s web page and click CONFIG

2. Enter administrator (default: admin) and password (default: admin).

3. Click Maintenance.

4. Click Factory Default.

5. Click Yes to confirm

7.2 Using Init Button

Plug in the power adaptor while pressing the Init button until LED indicators of USB1

and USB2 blink. (For Kcodes 601/601n, only USB LED will blink.) After that, plug off

the power adaptor and then plug in the power adapter again to restart the Server.

Finally, the Server will operate using the Factory Default values.

7.3 Default Parameters List

General Information

z Server Name: KC601 (for KCodes 601) or KC601n (for KCodes 601n) or KC604

(for KCodes 604) or KC604n (for KCodes 604n)