User's Manual

5.2.2 Setting up Server Configuration

To set up the Server configuration, click on the “CONFIG” icon ad then the system will

request user to enter administrator (default: admin) and password (default: admin)

to login.

 General Configuration

 Server Information: You have to set the Server Name, which is the

name to represent the Server.

 TCP/IP: You have to set the Server’s TCP/IP configuration to connect

TCP/IP network. Please see Chapter 3 Basic Installation for more details.

 UPnP Setting: Enable or disable the UPnP function.

 Printer Server Setting: Enable or disable LPR, IPP and RawTCP printing

protocol to support HPLIP network printer.

 Port Setting: Set port as NetUSB or Printer Server mode. While port is

NetUSB mode, you can operator Control Center to use Connect,

Disconnect, Request To Connect, Auto-Connect Printer and Network

Scanner function. While port is Printer Server mode, you can not use

Connect function on printer to use printer, but you can set printer as LPR,

IPP or RawTCP protocol printer to print.