User's Manual

103
When Enter Lock Code appears at the power-up…
☞ Your phone is phone locked. You must enter the Lock Code supplied together
with your phone.
When No Service appears…
☞ You probably are in the area out of the coverage of a GSM/ GPRS network.
When Emergency Only appears even though a number of the signal bar are
indicated…
☞ You probably are in the area out of the coverage of your home GSM/ GPRS
network. You probably are in the coverage of another GSM/ GPRS network but
you are not allowed to be registered to the network.
If any tone is not generated when you press a keypad…
☞ You need to check the quick silence mode setting. If you can find
icon on
the top of the main display screen it is the quick silence mode. By pressing and
holding [#] on the idle screen, you can switch it off. You need to check the Key
Tone Type of Sound Setting menu. You need to check Key Tone Volume of the
profile option that you have set on Profiles menu.