Information

ManualsBrandsKCL ManualsDIY & ToolsSivoChem 40 pc(s) Nitrile Disposable glove Size (gloves): 9, L CAT III

Description

PPE Type :

Product reference :

Glove description :

Available sizes :

Pictures :

Issued in Lyon by

Date of first issue :

Nadine PIPAZ

End of validity date :

CE Expert Team Coordinator

« X » indicates that the glove has not been submitted to the test or the test method appears not to be suitable for the glove design or material.

« 0 » indicates that the glove falls below the minimum performance level for the individual hazard.

MICRO-ORGANISMS AND VIRUS

EN ISO 374-1:2016 + A1:2018

EN ISO 374-5:2016

Type B

KPT

Certificate N° 0075/1445/162/04/21/0718 EXT 01/08/22

Issued by CTC, Notified Body N°0075, to the following model of personal protective equipment :

Manufacturer : KCL GmbH

Am Kreuzacker 9 36124 Eichenzell

Germany

05 August 2022

This product is a category III (letal or irreversible risk). This certificate shall only be used in conjuncture with the conformity assessment procedure

according to module D (Tüv Rheinland LGA Products 0197)

protective glove against chemical risks , against

microorganisms and virus risks

SivoChem® 759

At the date of the certificate, the product is in compliance with Annex XVII of REACh regulation (n° 1907/2006 and revisions)

Full description of the PPE, reference rules verified in the context of the EU-type examination and information given on the product are detailed in the

manufacturer's technical file index 01 dated from August 2022 and the Instruction for Use UI 759 v01.

NOTA : Any modification to new items of the personal protective equipment object of this EU type approval certificate or any modification of the information contained in the

manufacturer technical file which served for the deliverance of the EU type approval certificate (change of address, change of company status) should be brought to the

attention of the notified body in accordance with Annex V §7.2 of Regulation 2016/425. Any marking on the PPE which is not concerned by the Regulation (UE) 2016/425, is not

covered by this certificate.

7, 8, 9, 10, 11

Chemical protective nitrile glove, powderfree

Reference standard : Levels of performance / class of protection

EN ISO 21420:2020

05 August 2027

Summary of content (7 pages)

PAGE 1
Certificate N° 0075/1445/162/04/21/0718 EXT 01/08/22 Issued by CTC, Notified Body N°0075, to the following model of personal protective equipment : Manufacturer : Description PPE Type : KCL GmbH Am Kreuzacker 9 36124 Eichenzell Germany Product reference : protective glove against chemical risks , against microorganisms and virus risks SivoChem® 759 Glove description : Available sizes : Chemical protective nitrile glove, powderfree 7, 8, 9, 10, 11 Pictures : Reference standard : Levels of perform
PAGE 2
KCL GmbH MANUFACTURER’S TECHNICAL FILE TO THE PPE REGULATION 2016/425 Reference of the product : SivoChem® 759 Article code : / Technical file index : 01 Last update : August 2022 C0718e01 - KCL GmbH - N°0075-1445-162-04-21-0718 EXT 01-08-22.
PAGE 3
IDENTIFICATION Reference of the product : Article code : Minor Variant Technical file index : Last update : : : : : SivoChem® 759 / FlextrilTM 729 01 August 2022 Manufacturer : KCL GmbH Am Kreuzacker 9 36124 Eichenzell Germany tel : fax : +49 (0) 6659 87 211 N/A Factory : KCL GmbH Am Kreuzacker 9 36124 Eichenzell Germany tel: fax: +49(0)6659 87 211 N/A C0718e01 - KCL GmbH - N°0075-1445-162-04-21-0718 EXT 01-08-22.
PAGE 4
GLOVE DESCRIPTION General glove description and intended use: Chemical protective nitrile glove, powderfree This glove is designed against chemical risks , against microorganisms and virus risks. Type of coating finish : no coating Visual description (picture back and palm sides) : Risk assessment (Essential Health and Safety Requirement.
PAGE 5
PROTECTION SCOPE This glove meets the essential requirements of the Personal Protective Equipment Regulation 2016/425. This glove is designed against chemical risks , against microorganisms and virus risks.
PAGE 6
TEST REPORTS Laboratory EN ISO 21420 + innocuousness CTC Other L200711806_1 CHM0329637/2214/JH/A EN 374-2 L200711805_1 EN 16523-1 CHM0329637/2214/JH/B CHM0329637/2214/JH/C EN ISO 374-5 20.01880.
PAGE 7
Marking of packaging example : Method of marking on the glove : label on polybag Packaging suitable for transport: 200 pairs per carton / 20 pairs of gloves in a single polybag. PPE subject to ageing : Peremption period : 60 months / 5 years when stored in appropriate conditions (humidity, temperature, clean , ventilated, light). Before use, the glove shall be visually controlled, in case of deterioration the gloves must be scrapped (abrasion, cut, tear, …).