Installation Manual

59
Function Group 6: Drive Status and Reset
Function
No. Description Code
Factory
Setting
User
Setting
6.00 * Drive ID — —
6.01 * Software Version — —
6.02 * Drive Horsepower — —
6.03 * Fault Log 1 — —
6.04 * Fault Log 2 — —
6.05 * Fault Log 3 — —
6.06–6.09 Reserved — — —
6.10 ** Reset Drive to Factory Setting
1110: 50 Hz Operation
1111: 60 Hz Operation
1010: Default Program
(See 6.11 and 6.12)
0000
6.11 ** Program Location
0000: On-Board Memory
0001: Memory Module (Removable)
0000
6.12 ** Program Number
0001: Program 1 0003: Program 3
0002: Program 2 0004: Program 4
0001
6.13 ** Memory Copy Operation
0001: Copy from Memory Module to
On-board Memory
0002: Copy from On-board Memory to
Memory Module
0003: Copy Active Program to
On-Board Memory
0004: Copy Active Program to
Memory Module
0000
6.14 ** On-board Memory Program Number
0001: Program 1 0003: Program 3
0002: Program 2 0004: Program 4
0001
6.15 ** Memory Module Program Number
0001: Program 1 0003: Program 3
0002: Program 2 0004: Program 4
0001
6.16 ** Memory Module Operation
0000: Manual Read/Write Operation
0001: Automatic Read on Power up
0000
*Read only.
**Functions which can only be changed while the drive is in the Stop Mode.