Users Manual Part 2
Table Of Contents
- Appendix B. Regulatory Compliance and Agency Approvals
- Chapter 1. Kaye ValProbe RT System
- Chapter 2. Kaye ValProbe RT Hardware
- Chapter 3. ValProbe RT System Connections
- Chapter 4. Creating User Accounts
- Chapter 5. Defining Equipment
- Chapter 6. Defining Assets
- Chapter 7. Defining Study Setups
- Chapter 8. Viewing Live Data
- Chapter 9. Qualification Study
- Chapter 10. Sensor Verification
- Chapter 11. Qualification Reports
- Appendix A. Specifications
- A.1 Kaye ValProbe RT System
- A.1.1 List of Certified Countries
- A.1.2 Regulatory Compliance
- A.1.3 RF System Operating Frequency and Modulation
- A.1.4 RF Channels
- A.1.5 RF Network Topology and PAN ID (Network ID)
- A.1.6 Antenna Diversity
- A.1.7 Data Rate and Data Encryption
- A.1.8 RF Range (Line of Sight and Outdoor)
- A.1.9 Number of Loggers and Sensors Supported
- A.1.10 Sensor Sampling Rate
- A.1.11 Data Transmission Rate
- A.1.12 Sensor Samples Data Storage Capacity
- A.1.13 Optional Extendable Base Station Antenna
- A.2 Kaye ValProbe RT Base Station
- A.2.1 Input Power and Adaptor Ratings
- A.2.2 Installation Category
- A.2.3 Overvoltage Category and Electrical Safety Protection Class
- A.2.4 Input DC Power On/Off Switch
- A.2.5 Front Panel LED Indications and Buzzer
- A.2.6 Bath and IRTD Interface Ports
- A.2.7 USB Port
- A.2.8 Ethernet Communication Port
- A.2.9 Reset Switch to Reload Default Factory Settings
- A.2.10 Wakeup Magnet
- A.2.11 Batteries
- A.2.12 Unit Dimensions
- A.2.13 Enclosure Material
- A.2.14 Environmental Ratings
- A.3 Kaye ValProbe RT Logger
- A.3.1 Installation Category
- A.3.2 Overvoltage Category and Electrical Safety Protection Class
- A.3.3 Magnetic Switch
- A.3.4 LED Indications
- A.3.5 Calibration
- A.3.6 Real Time Clock Accuracy
- A.3.7 Sensing Elements
- A.3.8 Housing Material
- A.3.9 Logger Base Dimensions
- A.3.10 Ingress Protection
- A.3.11 Insulating Canister X2545
- A.3.12 Battery
- A.3.13 Shelf Life
- A.3.14 Battery Life
- A.4.1 Measurement Accuracy
- A.4.2 Body Environmental Ratings:
- A.4.3 Number of Input Channels
- A.4.4 Sensor Types and Measurement Range
- A.4.5 Sensor Lengths
- A.5.1 Measurement Accuracy
- A.5.2 Body Environmental ratings:
- A.5.3 Number of Input Channels
- A.5.4 Sensor Types and Measurement Range
- A.5.5 Sensor Lengths
- A.6.1 Measurement Accuracy
- A.1 Kaye ValProbe RT System
- Appendix B. Regulatory Compliance and Agency Approvals
- B.1 Electrical Safety Approvals:
- B.2 Radio and EMC Certification Approvals:
- B.3 Ingress Protection for Kaye ValProbe RT Logger
- B.4 United States FDA 21 CFR Part 11 Complaint Software Application
- B.5 Transportation Regulations
- B.6 FCC Compliance Statement
- B.7 ISED Canada Compliance Statement
- B.8 EU Compliance Statement:
- B.9
- Product Certification Labels
- Appendix C. Environnemental Compliance
- Appendix D. Warranty and Returns:
- Appendix E. Service Information
Appendix A. Specifications
Kaye ValProbe RT User Manual 136
A.2 Kaye ValProbe RT Base Station
A.2.1 Input Power and Adaptor Ratings
AC-DC adaptor input 100 to 240Vac 50/60Hz and output 12Vdc, 4A.
A.2.2 Installation Category
Pollution Degree 2, indoor use and maximum working altitude up to 2,000 meters.
A.2.3 Overvoltage Category and Electrical Safety Protection
Class
Overvoltage category II and Electrical safety protection Class II.
A.2.4 Input DC Power On/Off Switch
Switch to turn on/off DC input power to Base Station.
A.2.5 Front Panel LED Indications and Buzzer
LED indications on front panel and internal buzzer for status monitoring and alarms.
A.2.6 Bath and IRTD Interface Ports
Bath port supports to interface all Kaye brand temperature baths and IRTD port to connect
IRTD-400 temperature reference standard to run calibrations.
A.2.7 USB Port
USB port to connect USB storage thumb drive device to copy last ten raw study files.
A.2.8 Ethernet Communication Port
Ethernet RJ45 port to connect to LAN network or directly to console docking station.
A.2.9 Reset Switch to Reload Default Factory Settings
Push button reset switch to reset the base station to default factory settings.
A.2.10 Wakeup Magnet
Wakeup magnet (underneath LED panel) to wakeup Logger from shelf mode.
A.2.11 Batteries
Two 3.7V AA Lithium ion rechargeable batteries for 1-hour backup with three hour
recharge time.
A.2.12 Unit Dimensions
190 mm (7.6”) x 130 mm (5.2”) x 55 mm (2.3”) (L x W x H).