Instructions / Assembly

Page 5 of 5
CLEANING
• Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or
wipe carefully.
• To clean the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the
fuse box. Use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture.
TROUBLESHOOTING
• The light does not come on at all:
a) Check whether the bulbs were burned out.
b) Make sure the wall switch and circuit breaker are on.
c) Make sure the wiring is correct.
d) Make sure the circuit breaker is set in the “ON” position.
• Fuse blows or circuit trips when light is turned on.
a) Check for crossed wires, ensure wiring is correct.