Instructions / Assembly

INSTALLATION (continued)

Page 4 of 5

Installing the fixture body to the outlet box

• Place the canopy of the fixture body (A) against the outlet box, let the heads of support screws of bracket

plate (H1) come through the holes of the canopy of the fixture body (A).

• Tighten the cap nuts (H7) to the protruding support screws on mounting plate (H1) until the canopy of the

fixture body (A) is held firmly against the wall.

Note: The whole fixture can be installed facing up or facing down.

OPTION 1

OPTION 2

Installing the light bulbs

Assembling the glass shades

• Install the light bulbs (not provided) into the

sockets. Use four MAX 60 W medium base (E26)

type "ST64" bulbs (recommended).

Note: You can also use four MAX 60 W medium base

(E26) type "A" bulbs or MAX 9W medium

base (E26) self-ballasted LED bulbs. Do not

exceed the recommended wattage. Please

remove the protective film before installing

bulbs.

• Unscrew the socket rings (H8) from the sockets

on the fixture body (A). Set the glass shades

(B) onto each socket, and secure them with the

socket rings (H8).