Instruction Manual

24
GB
Only for use in closed,
ventilated rooms!
Don’t throw away –
recycle!
Packaging material –
Other cardboard
Dispose of the device
and packaging in an
environmentally friendly
manner!
Suitable for motorbikes
(Program 2)
Suitable for cars
(Program 3)
Suitable for the charging
of 12 V batteries
Suitable for the charging
of 6 V batteries
Direct current
Made from recycled
material
6 V mode (Program 1) Appliance class II
Protect electrical
connections from rain!
Winter AGM mode
(Program 4)
Do not smoke! Avoid flames and sparks!
Reverse polarity symbol Standby symbol
Car & motorcycle battery charger MPLGD 5.0 D2
z Introduction
Congratulations! You have purchased one of our high-quality products.
Please familiarise yourself with the product before using it for the first
time. To do this, please read through the following operating and safety
instructions carefully.
KEEP OUT OF THE REACH OF CHILDREN!
z Intended use
The MyProject MPLGD 5.0 D2 is a multi-level car & motorcycle battery
charger, which is suitable for charging and trickle charging 6 V (3 cells)
or 12 V (6 cells) lead acid batteries (maintenance-free batteries (MF),
open) with electrolyte solution (WET), with electrolyte absorbing mats
(AGM), with gel gel-type electrolyte (GEL) or calcium batteries. The
device is not suitable for charging lithium-ion batteries! You can also
regenerate discharged batteries (depending on the battery type). The car
& motorcycle battery charger has a safety circuit against sparking and
overheating. Keep these instructions in a safe place. Ensure you hand
over all documentation when passing the product on to anyone else.