User's Manual

Table Of Contents
28 of 64
Setting up the C-Hub
936.5468 0.92
5.8.2 Configure and Check Alarm Thresholds
1. Open the master C-hubs web GUI as described under 4.3, p. 15/4.4, p. 28.
2. Go to Alarms Alarm Thresholds.
3. Enter the threshold of the alarms as required; see ①ⓑ (Fig. 16).
4. Press Set to conrm the changes.
5. Wait at least 3 minutes.
1)
Then press Query all to check if an alarm was triggered.
1)
The system polls the status of all alarms every 3 minutes.
a
b
1
2
3
Fig. 16: Alarm threshold parameters (C-hub)