Installation & Assembly

1. Carefully remove all parts from the box.

2. Attach harp (C) onto the socket cup (E) and secure with thread ring (D).

3. Place shade (B) to the harp (C) and secure with finial (A).

4. Insert bulb (not included) into the socket.

5. Remove protective plug cover (F) from the plug.

6. Plug into a proper electrical outlet and test the fixture.

7. Installation is complete.

***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.

Ellery Table Lamp

Item # KS 3111

INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY

DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL.

ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.

NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO

REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND

INSTALLATION ARE FINAL.

DRY

Bulb

(Not included)