User guide

K A S P E R S K Y M O B I L E S E C U R I T Y F O R S Y M B I A N OS
79
Figure 67: Configuring the status window display
MANAGING SOUND NOTIFICATION
You can configure the use of the sound notification in case of certain events (detection of an infected object, message
about an application status, etc.) By default the playback of the sound signal in case of a virus detection depends on the
device profile (the setting’s value Profile dependent).
In order to edit the values of the settings, use the device's joystick or select the Change item in the Options menu.
By default the program uses the values of the settings recommended by Kaspersky Lab's specialists. If you wish to
restore the recommended values after you modified the settings, open the Settings window and select Restore from the
Options menu.
To configure sound notification, perform the following actions (see Figure below):
1. Select the Settings item in the Information tab.
2. Select Sound in the window that will open.
3. Set the required value:
If you wish the sound notification to be performed irrespective of the selected device profile, set the value to
Enabled.
If you wish the playback of the sound signal in case of a virus detection to depend on the device profile set
the value to Profile dependent.
To disable the sound notification, set the value to Disabled.
4. Select OK to save the changes.