User guide

K A S P E R S K Y M OBI L E S E C U R I T Y 8 . 0
78
VIEWING LOG RECORDS
To view all records stored in the Log, perform the following actions:
1. Select the corresponding item in the Log menu on the tab of the component information about operation of
which you wish to obtain (for example, Log item on the Anti-Virus tab).
2. Use joystick buttons to navigate through the Log. Up, Down – to move through the messages of the selected
component, Left, Right – to switch to the messages of other components.
To view more detailed information about a record in the log,
select a message and use the Details item from the Options menu.
DELETING LOG RECORDS
To delete all messages from the Log:
1. Select the Log item from the menu on the tab of any component (for example, the Log item on the Anti-Virus
tab).
2. Select the Clear Log item from the Options menu. All records from the Log for every component will be deleted.
DISPLAYING THE STATUS WINDOW
You can enable or disable the display of the status window at the application startup.
In order to edit the values of the settings, use the device's joystick or select the Change item in the Options menu.
By default the program uses the values of the settings recommended by Kaspersky Lab's specialists. If you wish to
restore the recommended values after you modified the settings, open the Settings window and select Restore from the
Options menu.
To configure the display of the status window, perform the following actions (see Figure below):
1. Select the Settings item in the Information tab.
2. Select the required value for the Show status screen item in the window that will open:
To display the status window at the program startup, select Yes.
If you do not want the status window to be displayed, select the No value.
3. Press Back to save the changes.