User guide

K A S P E R S K Y M O B I L E S E C U R I T Y F O R S Y M B I A N OS
63
Using the E-mail address field enter the e-mail address on which you wish to receive an e-mail message
about the new phone number.
In order to block the device once the SIM card is replaced or the device is turned on without it, set the value
for the Block device item to Yes. You can unblock the device by entering the secret code. By default
blocking of the device is disabled.
4. Press OK to save the changes you have made.
Figure 52: Configuring the SIM-Watch function
THE SMS-FIND FUNCTION
The SMS-Find function allows to determine the geographical coordinates of the device and to send them to the
requesting devices and to a certain e-mail address using an SMS message.
This function only works with devices with in-built GPS receiver. If necessary the receiver will be activated automatically.
You can receive the coordinates only if the device is within the area reached by satellites. If the satellites are nor
available at the moment of the inquiry, periodic attempts to find the satellites will be made until the device is restarted.
To enable the SMS-Find function, perform the following actions (see Figure below):
1. Select Settings on the Anti-Theft tab.
2. In the window that will open select SMS-Find.
3. In the window that will open, specify the e-mail address (the E-mail address setting) if you wish to receive the
device's coordinates by e-mail, in addition to the SMS message, and press OK.
4. Select Yes in the window that will open.