User guide

K A S P E R S K Y M O B I L E S E C U R I T Y 8 . 0
62
Figure 51: Deleting personal data
To create an SMS message using your phone's standard functions for creating SMS messages:
send to the device you need to block an SMS message containing text clean:<code> (where <code> is
secret code set on the receiving device. The message is not case sensitive and spaces before or after the colon
do not matter.
THE SIM-WATCH FUNCTION
SIM-Watch allows to send to the specified phone number and/or to e-mail address a new phone number and to block the
stolen device if the SIM card was replaced in such stolen or lost device.
By default the SIM-Watch function is disabled.
To configure the operation of the SIM-Watch function, perform the following actions (see Figure below):
1. Select Settings on the Anti-Theft tab.
2. Select SIM-Watch in the window that will open.
3. In the menu that will open (see Figure below) configure the settings to monitor the replacement of the SIM card
on the device.
In the Phone number field, enter the phone number to which a message from the new phone number will
be sent in case the SIM card is replaced in your device. Such number may begin with a digit or with a "+"
and must contain digits only.