User guide

K ASP E R S K Y M O B I L E S E C U R I T Y 8 . 0
132
Using the E-mail address specify the e-mail address on which you wish to receive an e-mail message
about your new phone number.
To block the device once the SIM card was replaced on it or when the device is turned on without the SIM
card, check the Block box. You can unblock the device only by entering the secret code. By default
blocking of the device is disabled.
4. Press Done to save the changes you have made.
Figure 115: Enabling the function
THE SMS-FIND FUNCTION
The SMS-Find function allows to determine the geographical coordinates of the device and to send them to the
requesting devices and to a certain e-mail address using an SMS message.
This function only works with devices with in-built GPS receiver. If necessary the receiver will be activated automatically.
You can receive the coordinates only if the device is within the area reached by satellites. If the satellites are nor
available at the moment of the inquiry, periodic attempts to find the satellites will be made until the device is restarted.
To configure the operation of the SMS-Find function, perform the following actions (see Figure below):
1. Open the Anti-Theft tab and select SMS-Find (the function being used must be enabled on the device receiving
the message).
2. In the screen that will open, specify the e-mail address (the E-mail address setting) if you wish to receive the
device's coordinates by e-mail, in addition to the SMS message, and press Done.
3. Select Done in the screen that will open.