User guide

K A S P E R S K Y M O B I L E S E C U R I T Y F O R M I C R O S O F T W I N D O W S M O B I L E
131
Enter secret code specified on the receiving SMS device in the field Remote code.
3. Press Done to send the message.
Figure 114: Deleting personal data
To create an SMS message using your phone's standard functions for creating SMS messages:
send to the device you need to block an SMS message containing text clean:<code> (where <code> is secret code
set on the receiving device. The message is not case sensitive and spaces before or after the colon do not matter.
THE SIM-WATCH FUNCTION
SIM-Watch allows to send to the specified phone number and/or to e-mail address a new phone number and to block the
stolen device if the SIM card was replaced in such stolen or lost device.
By default the SIM-Watch function is disabled.
To configure the settings of the SMS-Watch function, perform the following actions (see Figure below):
1. Open the Anti-Theft tab
2. Select SMS-Watch in the screen that will open.
3. In the menu that will open configure the settings to monitor the replacement of the SIM card on the device.
In the Phone number field, enter the phone number to which a message about your new phone number will
be sent in case the SIM card is replaced in your device. Such number may begin with a digit or with a "+"
and must contain digits only.