User's Manual

44 Kaspersky Administration Kit
old logical network and added to a new logical network manually using the
Administration Console.
You can connect a client computer to a different Administration Server locally
from the client computer.
This operation is performed using utility klmover.exe included into the Network
Agent distribution package. After the installation of the Network Agent this utility
will be located in the root installation folder of the component.
3.5.3. Slave Administration servers
Using the server hierarchy the following operation can be performed for all slave
Administration servers and client computers connected to it from the main
Server:
• application policies can be created and distributed;
• group tasks (including deployment tasks) can be created and distributed;
• updates and installation packages received by the main Server can be
distributed;
• reports with consolidated information on all slave Administration servers
can be created.
The policies and tasks received from a master Administration Server are not
available for modification on a slave server.
In order to add a slave Server use the New / Administration server item for the
Administration server object in the group as required. This will start the slave
server adding wizard. This wizard will perform the following:
• adding a slave Administration server;
• connecting the Administration Console to the slave Server;
• configuring setting of connection to the main Server.
• adding information about the slave Server tot he database of the main
Administration server.
You can skip the connection and configuration stages and perform the manually
at a later time. In order to do it connect to the Server that will be used as the
slave Server via the Administration Console and indicate settings for its connec-
tion to the main Server (see Figure 10).
After the slave Administration server has been successfully added, the Server's
icon and the name will be displayed in the corresponding group in the
Administration servers folder.