User Guide

Installing Kaspersky Anti-Virus SMTP-Gateway 23
allow the use of interactive scripts, such as rpm), some additional actions will
have to be performed by the administrator.
If you are using the rpm installation package, enter the following com-
mand to start configuration after the files are copied to your server:
/opt/kav/5.0/smtpgw/setup/postinstall.pl
The configuration process includes the following tasks:
• Setting up (by the administrator) of the server name that will be used
to identify the application in the SMTP-protocol commands when cre-
ating the DNS and notifications (the [smtpgw.network] section,
Hostname parameter). Enter the host name using the following for-
mat: <*.*>.
• Setting up the domain name that will be used to:
• Assign the Postmaster address ([smtpgw.network] section,
Postmaster parameter)
• Assign the sender’s return address for notifications
([smtpgw.options] section, NotifyFromAdress parameter)
• Define the administrator’s address ([smtpgw.options] section,
AdminNotifyAddress parameter)
• Allow incoming mail to this domain ([smtpgw.options] section,
Rule parameter).
Enter the domain name using the following format: <*.*>.
• Defining the interface and port that listens to the incoming email traffic
( [smtpgw.network] section, ListenOn parameter). Type the port
name and the IP address in the format <x.х.х.x:y>, where:
x.х.х.x is the IP address, and
y is the port number.
• Specifying local network identifiers ([smtpgw.access] section, Rule
parameter). This value is used to assign rules for message delivery
and processing, for example, rules specific for your organization con-
cerning mail processing, or blocking email messages from external
servers, etc. Specify the values using the following formats:
<x.х.х.x>, <x.х.х.x/y.y.y.y>, or <x.х.
х.x/y>, where:
x.х.х.x is the IP address, and
y.y.y.y or y is the subnet mask.