User Guide

KASPERSKY LAB LTD.
82
8282
82
The new version of KAWALL provides this option. And now
the user can define it him(her)self.
Parameters=>HTTP (SMTP/FTP)=>Options=>
Hold=>Percent.
Or in the configuration file kawall.cfg (the
HoldFilePER= parameter).
Question: After the installation of KAWall the messages are
coming in without attachments (the attachments are cut off).
What I must do to solve this problem?
Answer: The solution is as follows: go to the firewall settings
(SMTP Definition) and make sure the Strip MIME of Type
field on the Action2 page is left blank (the default value in
this field is message/partial – it must be deleted).
Question: I have some problems with routing of the data
packets and suspect that my KAWall is the reason. How can I
check this?
Answer: To check this, follow the steps:
1. Select Resources from the Manage menu of your
firewall.
2. In this window, select the firewall settings window for
the required protocol and open it for editing.
3. In the CVP section of this window (the CVP server
settings for the certain protocol) select the None
option button instead of Read Only or Read/Write.
If the problem persists, it is not related to your KAWALL. If no
sign of the problem is left, immediately contact the technical
support service of Kaspersky Lab.