User Guide

KASPERSKY ANTI-VIRUS

6565

5.4.4.4.

5.4.4.4.5.4.4.4.

5.4.4.4.

Holding settings

Holding settingsHolding settings

Holding settings

One of the most important features of this new version of KAV for

Firewall is that it allows to define holding settings for the examined

files.

The point is that, quite often users failed to download files of a large

size. It happened because KAV for Firewall took a lot of time

checking for viruses in those files, and remote computers

automatically suspended operations after a specified time-out

interval.

Now you yourself can define the Hold settings:

the Percent numerical field allows to define the percentage of

object size that can be held by KAV for Firewall for checking. If the

value in this field is 100, it means that KAV for Firewall will hold the

files in whole. If the value is zero, the program will not check for

viruses in the files.

These options correspond to the following parameters of the [HTTP

Scan] section in kapwall.cfg: HoldTimeSEC, HoldFilePER

(see subchapter 5.2.2).

5.4.5. Defining setting by editing the

configuration file

The [HTTP Scan] section of the configuration file also allows to

change the program settings for HTTP.

This section contains the following strings:

Enable

— enables/disables the program to check for viruses in the

HTTP traffic. Available values: Yes or No (see subchapter 5.4.1).

FileMask

— allows you to select file masks that will be checked by

the system (see subchapter 5.4.2). Available values: