User Guide

CONFIGURING THE PROGRAM
56
5656
56
)
To limit the size of your log file, follow the steps:
1. Check the Limit size box.
2. Define the maximum size of your log file (in Kb) in the
text field.
If you check the Append box, KAV for Firewall will add each new
report to the file’s existing contents. If the box is not checked, only
the most recent check report will be available.
These options correspond to parameters of the [LogFile] section
in kapwall.cfg (see subchapter 5.2.2).
5.3.5. Changing general settings in the
configuration file
To change general settings of KAV for Firewall you must edit
strings of the
[Commons]
and the
[LogFile]
sections in the
configuration file
This sections contain the following parameters:
Enable
— enables/disables KAV for Firewall to check for viruses in
the data passing through the firewall via all the protocols. Available
values: Yes or No (see subchapter 5.3.1).
TempFolder
— contains a name of the directory for your KAV for
Firewall temporary files (see subchapter 5.3.3).
DatabasesSetFile
— contains a full pathname of the program
SET file (see subchapter 5.3.2).
Enable
— enables/disables the program to save check reports to a
log file. Available values: Yes or No (see subchapter 5.3.4).
FileName
— contains a name of the log file (see subchapter 5.3.4).
LimitSize
— allows to limit the size of your log file. Available
values: Yes or No (see п. 5.3.4).