User Guide

98 Kaspersky Administration Kit
Names of the variables of the executable module
environment coincide with the names of substitute
parameters used to format the notification message
text (see below).
• Enter a text of the notification to be sent to the defined recipi-
ents. Click the Message text… button and type the template in
the dialog box that appears (Figure 73).
The notification text may include information about the event
recorded. To provide this information, select the following
parameters from the drop-down lists accessed using the Insert
button:
o Event severity – Severity of this event.
o From computer – Name of the client on which this event
has occurred.
o From domain – Name of the domain that includes the
computer.
o Event – Event type.
o Event description – Event description.
o Registration time – Time when this event was recorded.
o Task name.
o Application.
o Version.
o IP address
o Connection IP address.
• Sender and subject of the notification message. To do this, click
Settings and, in the new window (see Figure 74), fill in the
From and Subject fields.
The availability of the fields depends on the notification delivery
mode.
The default settings are those set on the Notification tab of the
administration server properties (see section 8.2 on page 140).
In order to verify the correctness of the settings configured in this
window, you can manually send a test message. In order to do it,
press the Test button. As the result, messages created based on