User Guide

90 Kaspersky Administration Kit
Figure 65. Creating a policy. Activating the policy
4. Then you have to consider the general settings for the policy and
configure settings for the selected application (Figure 66). You can
lock policy settings for nested groups, application settings, or task
settings. The policy settings that can be locked are marked with the
icon . To lock a setting, click this icon. The icon will change to
.
Local application settings have a higher priority than
policy settings. For a policy to take effect on client
computers, you should lock certain parameters.
When creating a policy, you can only configure a minimum set of
parameters required for operation of the application. All other
settings are set by default and correspond to default values applied
during the local installation of the application. The policy created
can be modified later (see section 6.2 on page 91).
For more information about configuring the policy for each
application, refer to the corresponding documentation.