User Guide

HIERARCHY of Administration Servers 83
Files\Kaspersky Lab\Network Agent. If this folder does not exist, it
will be created automatically. Click Browse to select another location.
4. In the Administration Server wizard’s box (see Figure 60), you
should specify the following settings for the Network Agent to connect
to the Administration Server:
• The Server address field contains the address of the computer
running (or to be running the Administration Server. You may
use either the IP address or the network computer name (Net-
BIOS-name).
• The Server port field shows the port number used by the Net-
work Agent to connect to the Administration Server. The default
port is 14000. If this port is already in use, you can change it.
Use only multiples of ten.
• The Server SSL port field contains the port number used to
connect to the Administration Server through SSL. The default
port is 13000. If this port is already in use, you can change it.
Use only multiples of ten in this field. To enable the SSL con-
nection, check the Use SSL to connect to server checkbox.
Figure 60. Installing the Network Agent.
Configuring connection settings