User Guide

Viewing, creating, and configuring a logical network 51
• Port number that will be used to connect to the new Administra-
tion Server through the SSL protocol – in the Server SSL port
field.
Using the Choose certificate… button specify the certificate file
used to authenticate the new Administration Server in the
Kaspersky Administration Server certificate field.
The file has the .cer extension and is located in the
Cert folder in the Kaspersky Administration Kit
directory on the Administration Server (to which the
computers are moved). You can copy the certificate
file to a shared folder or a floppy disk. This copy can
be used to configure access settings.
Figure 34. Creating a task for changing the Administration Server.
Defining the server and selecting the certificate.
Later, you can change the task settings on the Settings task (see
Figure 35) of the task settings window (about task settings, see
section 7.4 on page 117).
5. If you create a global task, you should form a list of target clients (see
section 7.2 on page 114). After the task completion, these clients will
be moved to the Unassigned group of another logical network and
attached to the specified Administration Server.