User Guide

50 Kaspersky Administration Kit
2. Run the group or global task wizard (details see Chapter 7, page
105).
3. At the stage of selecting the application and defining the task type
(see Figure 33), specify the following:
• In the Choose the application for which to define a task
drop-down list – Kaspersky Network Agent;
• In the Choose type of task for execution drop-down list –
Change Kaspersky Administration Server Task.
Figure 33. Creating a task of changing the Kaspersky Administration Task.
Selecting the application to install.
4. At the next step (see Figure 34), define settings that will be used by
the Network Agent installed on clients to connect to the new server.
In the Kaspersky Administration Server connection parameters
group, specify the following:
• New Administration Server address – in the Address field. You
may use either the IP address or the network computer name
(NetBIOS-name).
• Port number that will be used to connect to the new Administra-
tion Server – in the Server port field.