User Guide

Getting started 19
Figure 7. Viewing IP subnetwork settings
The General tab
• change the subnetwork's name;
• determine the whether the Administration Server will automati-
cally move new computers added to the subnetwork to include
them to the structure of the logical network. In order to do this,
check the Move computers into group and select the required
administration group using the Select button.
• change the value of the time interval after which information
about an inactive computer will be deleted from the Administra-
tion Server database - in the IP address lifetime (hours).
• permit or cancel polling of the computers in this subnetwork by
the Administration Server when performing a regular polling of
the computer network. If you do not want the Administration
Server to poll the computers during the next poll, uncheck the
Allow IP subnetwork scanning box.
You can add or delete IP ranges that define the subnetwork and change
the alter their settings in the IP ranges tab (see Figure 8).
• start and end IP addresses of the range;
• subnetwork mask and address.