User Guide

Configuring a logical network 81
Figure 65. Selecting the source for retrieving updates
7.4.2. Updating the anti-virus database
storage on a server from another
server on the logical network
If your logical network contains more than one server, you are recommended to
configure other servers to automatically retrieve the anti-virus database updates
from one server. This facilitates management of your network and reduces the
possibility that a server may fail to timely update its database storage.
Let us assume that you set the S0 server to update its database storage via the
Internet and the S1, S2, etc. servers to update their storages from the S0 server.
To configure the S1 server to automatically retrieve the updates from
the S0 server, follow these steps:
1. Install the software for workstations (Kaspersky AV Control Centre
and Kaspersky AV Updater included into Kaspersky
®
Administration Kit) on the S1 server and add this workstation to the
S0 server as described in subchapter 6.3 on page 47. An example
of this network configuration is shown in Figure 66 (a workstation
with the address 192.168.1.1 exists on the same computer as the
S1 server and is added to the S0 server).