User Guide

52 Kaspersky Administration Kit
Figure 35. The product upload wizard box
4. The installation file to be uploaded to the server must contain a
special file with the product description (the file extension is
.kpd).
Click the
button at the right of the KAV Product description
file path field and select the required file in the MS Windows
standard dialog box.
5. Click the
button at the right of the KAV Product key file path
field and in the MS Windows standard dialog box, select the file
with a user key for this product (the file extension is .key).
6. You can precustomize Kaspersky AV Control Centre before you
install it on the workstations (schedule tasks, etc.). If you do not do
this, the program will be installed with default settings. The required
settings may be copied from any existing installation of Kaspersky
AV Control Centre. To copy the settings, you must first export the
settings from the precustomized installation into the policy
.dat file.
For details of the export procedure, see the Kaspersky AV Control
Centre description in the User Guide "Kaspersky Anti-Virus
®
for
Workstations." You can also use Kaspersky
®
Network Control
Centre to export the workstation settings (see subchapter 7.7.2 on
page 94). If the file with the settings has already been created, click
the button at the right of the KAV Control Centre settings
file field and select the file in the MS Windows standard dialog box.
7. Click Next to proceed. The program will start copying the
installation files.