User Guide

50 Kaspersky Administration Kit
4. If the workstation to be added is password protected for network
access, enter the password in the Password field. If you are
adding more than one workstation, the program will try to use this
password for all the workstations to be added. (The next step
allows you to define a separate password for every workstation to
be added.) Click OK.
5. If the network password of the workstation (see subchapter 6.3 on
page 47) differs from that you defined at the previous step, the
Password to access object via network dialog box will appear on
your screen.
6. Enter the network password for the selected workstation in the
Password text field.
7. Click OK.
8. The three previous steps must be repeated for every workstation if
the passwords you entered for them were wrong.
You cannot add a server to the logical network more than once because
this may result in incorrect performance of the program.
6.4. Deployment of Kaspersky Anti-
Virus
®
on workstations
To deploy Kaspersky Anti-Virus
®
on workstations the administrator must:
• Add at least one server to the logical network (see subchapter 6.2 on
page 46).
• Place the required software into the program storage on the server (see
subchapter 6.4.1 on page 51) (this step allows you to install the Kasper-
sky Anti-Virus
®
software with network support);
• Define the network password and other settings for the Kaspersky AV
Control Centre program (see subchapter 6.4.2 on page 53);
• Launch the remote installation of the software from the server on the
workstations (see subchapters 6.4.2 on page 53 and 6.4.3 on page 57).
Before you start the deployment of Kaspersky Anti-Virus
®
of version
3.5.5.x or later on a computer with preinstalled Kaspersky Anti-Virus
®
of
version 3.5 or 3.0, make sure to manually remove the previous installa-
tion from this computer. Otherwise, the new version will overwrite the
previous one, and this will result in the incorrect performance of the
package programs.