User Guide

Configuring a logical network 49
Note that workstations appear in the list not immediately
after you have installed the Kaspersky Anti-Virus
®
pack-
age on them. It may take more time, approximately
three minutes.
Now you can exclude the workstations already added to the logi-
cal network from the list. To do this, check the
Exclude ad-
dresses already added to KAV Network check box. If you want
to add workstations by their IP addresses, check the
Add by
IP address check box. Then, select the required workstation (or
several workstations) from the list and click OK.
Figure 33. Selecting the workstation
! To display the complete list of workstations located in the same
network segment as the administrating station, click the arrow
at the right side of the button. In the two-command
menu, select the Browse Microsoft network… command. The
Browse for workstation dialog box with the complete list of
computers on the Microsoft network will appear on your screen.
! If you want to add a workstation that is not defined in the list,
enter its address in the Address of workstation(s) field.
You can type more than one workstation address in the Address of
workstation(s) field. Every address must be enclosed in quotation
marks and separated by space characters (for example, "andrey"
"roma" "alex"). All the defined workstations will be added to the se-
lected server.
It is impossible to add a workstation to the logical network if its NetBios
name consists of numbers only (e.g. 123). We advise that you add such
a station using its IP address.