User Guide

32 Kaspersky Administration Kit
Figure 15. Adding a workstation
3. Enter the required workstation address in the Address of
workstation(s) text field.
It is impossible to add a workstation to the logical network if its
NetBios name consists of numbers only (e.g. 123). We recom-
mend that you add such a station using its IP address.
4. Enter the network access password to the Kaspersky AV Control
Centre program in the Password text field (the password you
defined during the installation of the program on the workstation).
Click OK.
In future, you will be able to select workstations and their supervising servers in
the network pane of the main window and customize anti-virus settings on the
tabs in the object property pane . The object property pane occupies the major
part of the Kaspersky
®
Network Control Centre main window. An example of
settings for a workstation is shown in Figure 16.
In the figure below, you can see a list of Kaspersky Anti-Virus
®
tasks to be
performed on a workstation. You can select any task in this list and remotely
schedule this task to start, launch it on demand, terminate it, etc. For details of
these settings, see chapters below.