User Guide

58 Kaspersky Anti-Spam 3.0
(syslog facility). In particular, the mail.info level specified by default in
FreeBSD for the mail facility decreases the level of details even if the
Verbose level parameter has been assigned the more debug value.
The more debug level of details causes additional load on
the server and may decrease its performance. Please use
that level only for debugging of application operation.
After modification of common parameters for the filtration server, click the Apply
button and restart the filtration server using the following command:
# /etc/init.d/kas3 restart
in Linux distributions
# /usr/local/etc/rc.d/kas3.sh restart
in FreeBSD.
4.5.2. Parameters of the filtration master
process
The Settings → Anti-Spam Engine → Process Server page contains the
following settings for the filtration master process (see Fig. 19):
• Max. number of filtration processes – maximum number of filtering
processes running simultaneously. Default value: 10.
• Number of filtration processes at server start-up – the number of
filtration processes initiated when the filtering process starts. By default,
the parameter is set to 0. It means that the processes of the filtration
module will be initiated only when messages arrive.
• Number of spare filtration processes – maximum number of running
filtration processes expecting a request for analysis. If the number of
processes exceeds the specified limit, the application terminates unused
processes. Default value: 0.
After modification of common parameters for the master process, click the Apply
button and restart the filtration server using the following command:
# /etc/init.d/kas3 restart
in Linux distributions
# /usr/local/etc/rc.d/kas3.sh restart
in FreeBSD.