User Guide

26 Kaspersky Anti-Spam 3.0
Passwords for access to the Control Center are stored in the .htpasswd
file in an encrypted form.
The interface and port number to be used for connection to the Control Center
are specified in the /usr/local/ap-mailfilter3/etc/kas-thttpd.conf file using the host
and port parameters respectively. E.g., the following values:
host=0.0.0.0
port=3080
mean that the Control Center will listen on port 3080 of all server interfaces
expecting incoming connections. By default, the Control Center can only be
accessed from the server where Kaspersky Anti-Spam is installed (the host
parameter is set to 127.0.0.1).
After modification of port number, reload the Control Center configuration. In
Linux distributions, run the following command:
# /etc/init.d/kas3-control-center restart
In FreeBSD distributions, run the following command:
/usr/local/etc/rc.d/kas3-control-center.sh restart
3.4. Installing the license key
Your license key corresponding to the purchased license is bundled with the
distribution package of Kaspersky Anti-Spam.
If for some reason you have no license key, contact the Technical
Support service of Kaspersky Lab (see section Services/Technical
Support of Kaspersky Lab website).
In order to install a new license key using the Control Center, perform
the following steps:
1. Use your web browser to connect to the Control Center by entering
http://localhost:3080/ in its address line. Enter admin as the user
name for connection, and admin as the password.
2. Open the license keys management page at
License → License Keys.
3. Use the field in the lower part of the page under the Install a New
License Key section to specify the path to a license key file or
press the Choose button to select the necessary file.
4. Press the Apply button.