User Guide

Configuring Filtering Parameters 53
manually or select an address list from those formed on the e-mail tab (see para
5.2.5, page 73):
Valid for recipient(s) — independently create an address (address list)
for which this profile will be used. Specify the addresses in the
parameter field manually, separating addresses by semicolons.
E-mail addresses are created either in the
user@domain or
@domain format. The latter format includes any user of the
domain specified.
Valid for recipient list —select from the drop-down list a list of
addresses for which this profile will be used.
A list of recipients in the personal profile may remain empty (default
personal profile). In this case this personal profile can be used for all
recipients to whom no other personal profiles were applied (see para
4.3.4.1, page 31).
Figure 6. Creating personal profile
5.2.2.2. Activating personal profiles
WebConfigurator allows created profiles to be enabled (activated) and disabled
(deactivated).
Only active profiles are involved in the filter operation. All other profiles remain
backup profiles. They can be edited, or can be used for fast switching between
the filter operation modes, etc.