System information

Installing application on the computer 45
STEP 9. FINAL PREPARATION FOR THE
INSTALLATION
During this step you will be offered to perform the final preparation for the
installation to your computer.
During the initial and custom application installation (see section "Step 5.
Selecting the installation type" on page 42) we recommend that you do not
uncheck the Enable Self-Defense before installation box during the initial
installation. If the module protection option is enabled, then, if an error occurs
during the installation, it will ensure a correct installation rollback procedure.
When you retry the installation we recommend that you uncheck this box.
Note
In case of a remote installation of the application via Remote Desktop we
recommend that you uncheck the Enable Self-Defense before installation box.
If this box is checked, the installation procedure may be performed incorrectly or
not performed at all.
To proceed with the installation press the Next button. As the result installation
files will start copying to your computer.
Warning!
During the installation process current network connection will be severed if the
application package includes components for intercepting network traffic. The
majority of connections terminated will be restored after some time.
STEP 10. COMPLETING THE
INSTALLATION
The Installation complete window contains information about completing the
procedure of the application installation on your computer.
If it is necessary to restart the computer to correctly complete the installation, a
corresponding notification will be displayed on the screen. After the system
restart the setup wizard will be automatically started.
If the system restart is not required to complete the installation, press the Next
button to start the application configuration wizard.