User Guide

AntiViral Toolkit Pro
- 56 -
7. Warning and error messages
7.1 Run-Time error messages
"Cannot allocate memory"
This message may appear if there is not enough memory for AVP Inspector
for Web Servers™ to complete some operation.
"Cannot open AVPITABX.DAT"
where X is a drive letter. This message means that it is impossible to open
the specified table file. (Note that the name can be changed at installation
time or using the Configuration dialog).
This message may be caused by several reasons. Tables on X: drive may not
have been created. To correct this problem you should create the tables.
Also check the table name setting. If you changed this setting, check if the
tables with this name exist. If not, recreate the tables.
"AVPITABX.Dat table file already exists. Overwrite the tables?"
This message may appear if an attempt is made to create tables for a drive
with already existing tables. As explained above, the table file name may be
other than AVPITABX.DAT.
"The existing AVPITab.Dat file is incompatible with this version of
AVP Inspector for Web Servers. Please create new table file."
This message may appear if you have updated AVP Inspector for Web
Servers™ to a newer version. Newer versions of AVPI may use a different
table file format. In this case you should recreate the table file.
"CRC error in table file. Be careful testing drive X:. AVP Inspector
for Web Servers™ operation may be disrupted!"
Before running any tests, AVP Inspector for Web Servers™ checks the
validity of each table file. If changes are found this message is displayed. If
you see this message try to find the reason for the changes in table files. It is
recommended that you recreate the tables for this drive to eliminate this
error.