User Manual
8
responsible person. Personal protective equipment (PPE) is to be used only on
or with energy absorbing systems (tor example dynamic ropes, energy absorbers
etc.). Check that this product is compatible with the other components o you
equipment, see the instructions specic to the products. To prolong the lie o
this product, take care when transporting and using it. Avoid impacts, or contact
with abrasive suraces or sharp edges.
LABELING: information contained on the inside of the helmet, printed on a
label, should not be removed or any reason.
ADDITIONAL REQUIREMENTS (only for the Zenith): This helmet complies
with additional requirements according to the standard EN 12492:2012 – Shock
absorption § 4.2.1.2 (Front), § 4.2.1.3 (Side), § 4.2.1.4 (Rear) and EN50365:2002 §
5.3 electrical requirements”
EN