Product Manual

4
OWNERS MANUAL
7. Once you reach the marked buoy, thread a rope through the two holes of the diffuser base. Pull through
until the rope is at the midway point by the diffuser base.
8. While holding the two ends of the rope, gently lower the diffuser assembly into the water.
9. Continue lowering the assembly slowly until it reaches the bottom of the pond.
10. Pull up on only one side of the rope to bring it back. The Robust-Aire® Diffuser should now be seated
properly on the bottom of the pond. (Optional: For ease of future maintenance, it is recommended to leave
rope looped through diffuser base and tie both ends to marker-buoy or duck decoy. This will allow diffusers
to be located easily and pulled up for maintenance.)
11. Repeat the process for additional Robust-Aire® Diffuser locations.
Compressor Connections
12. When back on shore, finish connecting the tubing to the lead hose from the compressor with the supplied
barb fitting from the tubing kit. Secure and tighten clamps to both supply tubing and compressor hose.
Caution: Do not over tighten clamps.