SURE-FEED BROADCASTER Instructions for MODEL 3-PT. M96 (3-BU. CAPACITY) ASSEMBLY, MOUNTING, SEEDING, OPERATING and MAINTENANCE REPAIR PARTS LIST HERD SEEDER COMPANY, INC. P.O. Box 448 • 2383 South U.S. 35 • Logansport, IN 46947 Phone: 574-753-6311 • Fax: 574-722-4106 Email: info@herdseeder.com www.herdseeder.
SERIAL NUMBER LOCATED ON UPPER CONTROL HANDLE PLATE. MODEL 3-PT. M-96 BROADCASTER WARNING 47 SPINNING BLADES HAZARD To Prevent Serious Personal Injury or Death: KEEP HANDS, FEET AND CLOTHING AWAY FROM SPINNING BLADES. STAY CLEAR OF ALL MOVING PARTS WHEN IN OPERATION. KEEP OTHERS AWAY. KEEP ALL GUARDS IN PLACE. STOP MACHINE AND DISCONNECT POWER BEFORE ADJUSTING, LUBE OR SERVICE. Warning Decal - If missing Call 574/753-6311 for free replacement.
PHOTO # 1. 2. 3. 4. 5. 6. 7. 8. 9. 9A. 10. 11. 12. 13. 14. 15. 16. 16A. 17. 18. 19. 19A. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 30M. 30F. 31. 32/33/34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 46. 47.
TO ASSEMBLE MODEL 3-PT. M-96: 1. Place Broadcaster wrong side up for ease in assembly. 2. To connect handle, remove small tension bolt (1/4”), washer and spring assembly that runs through opening linkage and gauge. Lubricate opening plate with oil so it works freely. Run thumb-screw out three-fourths of the way and move gauge away from handle against Broadcaster base. Rotate flat handle around so that front edge of handle is under corner of the gauge...
MAINTENANCE: 1. When this 3-PT. M-96 is being used for nitrates, fertilizer or any type of highly corrosive material, be sure to clean thoroughly when through by flushing out with water. Lubricate seed opening guides and plate, and also, all parts that may corrode, before storing. In doing this, your Broadcaster will give much better service when you are ready to use it next time, and also, it will prolong the life of the machine. 2.
LIMITED WARRANTY This Herd Broadcaster was thoroughly tested before it left the factory. We warrant each Broadcaster sold by us to be free from defects in material and workmanship when used according to our directions. OUR OBLIGATION UNDER THIS WARRANTY IS LIMITED TO MAKING GOOD AT THE FACTORY ANY DEFECTIVE PART OR PARTS THEREOF WHICH SHALL WITHIN THREE MONTHS AFTER DELIVERY OF SUCH HERD BROADCASTER TO THE ORIGINAL PURCHASER, TO BE RETURNED TO US.