Product Manual

3
2 Year Warranty or 3 Year Warranty depending on the
model. This warranty covers any and all manufactur-
ers defects within the warranty period from the date
of purchase (See Warranty, Warranty Claim, & Return
Policy). Please register your Aerator online at:
www.kascomarine.com (under the technical tab)
USE AND OPERATION
Kasco Aerators are designed and engineered for
continuous duty, such as on sh farms or other aqua-
culture applications, or on-demand use, as needed in a
recreational water feature.
During otation operation, the water is pulled from
360
O
around the unit and from below the unit. The
water is pulled upward and thrust through the otation
collar into the air.
Your Kasco Marine Aerator is ready for immediate use
(after installation). Make sure to keep the motor hous-
ing clean from hard water deposits and/or algae. (See
Maintenance Recommendations.)
Kasco Pond Aerators and Water Circulators are light-
weight, energy efcient, and easy to install and oper-
ate. We strive to produce products that exceed cus-
tomer expectations. We hope you enjoy your Kasco
Pond Aerator or Water Circulator.
Unit Specs
Model Voltage Operating
amps
lock rotor
amps
single phase aerators
2400AF 115 5 @115V 12@115V
3400AF 115 6.7 @115V 18@115V
3400HAF 208-240 3.4 @240V 9@240V
4400AF 115 11.3@115V 40@115V
4400HAF 208-240 5.7@240V 20@240V
8400AF 208-240 9.0 @240V 40@240V
3.1AF 208-240 10.7 @240V 63@240V
5.1AF 208-240 18 @240V 97@240V
3 phase aerators
2.3AF 208-230 4.5 @ 230V 40
3.3AF 208-230 8.2 @ 230V 70
5.3AF 208-230 13 @ 230V 100
2.3HAF 460 2.3 @ 460V 20
Model Voltage Operating
amps
lock rotor
amps
3.3HAF 460 4.1 @ 460V 35
5.3HAF 460 6.5 @ 460V 50
Single phase circulators
2400CF 115 5@115V 12@115V
3400CF 115 6.7@115V 18@115V
3400HCF 208-240 3.4@240V 9@240V
4400CF 115 11.3@115V 40@115V
4400HCF 208-240 5.7@240V 20@240V
8400CF 208-240 9.0@240V 40@240V
2400AF, 3400AF/HAF, 4400AF/HAF Parts
Included:
1. Aerator (Unit with cord or unit with Disconnect(1)
2. Float (with three 50’ mooring ropes attached) (1)
3. 1/4-20 x 3 1/2” Phillips Pan Head Screw (4)
4. 1/4” split washers (4)
5. 1/4” (3/4” outer diameter) Flat Washer (4)
6. Float Retaining Clips (4)
Optional: (bottom screen installation parts)
7. 3/8”-16 x 1-3/4” Hex Head Bolt (2)
8. 3/8” Flat Washer (4)
9. Bottom Screen cushions (3)
10. Bottom Screen (1)
11. Bottom Screen Clips (2)
12. 3/8”-16 Nylon Lock Nut (2)