Specifications

1. Power and Audio Mute Switch.
2. Antenna: Transmit the RF signal of transmitter.
3. Belt Clip: Attach the transmitter to the belt.
4. Audio Input Jack: it is suitable for lavalier system/headset system.
5. Low Battery Indicator: Red light glows when it is lack of power and should
renew the battery.
6. LCD Information Display: Show the transmitter frequency channel ect.
7. Gain Adjusting Volume: Adjust the transmitter audio input gain.
8.State Setting Switch: Set the using state of lavalier system(L)/headset
system(H).
9.Up Function Button: Sets channel data.
10.Down Function Button: Sets channel data.
ANT.BANT.A
ANT.BANT.A
2. Antenna: Keep the position of antenna at a 45 angle from vertical, .(Shown
as below)
14 5 2
3
7 8
6
9 10
1. Grille: Protects the cartridge and help reducing the breath sounds and wind
noise.
2. LCD Information Display: Show the transmitter frequency channel ect.
3.Down Function Button: Sets channel data.
4.Up Function Button: Sets channel data.
5.Power and Audio Mute Switch.
6.Battery Cover: Open it to install the battery.
1
6
ON
ON
4
5
2
3
5 6
OFF
1
2
4
5
3
6