Installation Guide

1. 2. 3. 4.
5. 6. 7. 8.
Usingapairofscissors,
cutoutthetemplateon
themarkedline.
Carefullyremovethe
falsefrontandcabinet
doors.Applymasking
tapetofaceframewhere
cutswillbemade.
Tapethetemplateflushto
thetopofthefaceframe
centeredonthecabinet
fromsidetoside.
Tracelineoftemplate
ontothetape,then
removethetemplate.
Makecutswithajigsaw. Placehorizontal2x6’son
eachsidewall3/8”below
thetopofthecabinet.
Screwintoplace.
Gentlyslidesinkinto
position.Makesuretop
ofsinkisflushwiththe
topofthecabinetface
frame.
Reattachcabinetdoors.
Sinkinstallationisnow
complete.Youareready
toinstallyourcountertop.
Installation Instructions
QAR-750