Installation Guide

Table Of Contents

PAGE 1
PAGE 2
PARTS SHEET KKF310** . Spray Head . Faucet Body . Rubber&Metal Washer . Mounting Nut . Mounting Screws . Spray Hose . Quick Connector . Hot&Cold Water Lines Oo Nola awn . Weight 10. Hex Wrench 11.
PAGE 3
PAGE 4
INSTALLATION GUIDE 1. Remove the mounting nut rubber&metal washer (#3) from the faucet body 2. Insert the main body into the hole with the o-ring the rubber&metal washer (#3) and mounting nut (#4) from the faucet bottom.
PAGE 5
INSTALLATION GUIDE STEP 3 3. After adjusting the direction of the main body, tighten the mounting nut (#4) with hands and tighten the mounting screws (#5) with a Philips screwdriver. STEP 4 4. Connect spray hose (#6) to quick connector (#7) attached to supply line.
PAGE 6
INSTALLATION GUIDE STEP 5 5. Connect the water lines to outlet tightly. Turn on the outlet and check for leaks.
PAGE 7
OPERATION How to operate the handle: Hot water 1. Open the handle lever to turn water on. Push to turn off. 2. Turn the handle lever to the left to increase hot water flow with higher water temperature. Lower the water temperature by operating reversely. Spray The operation of the spray diverted: 1. When first turned on, water comes from aerator. 2. Press button back, water comes from nozzles. 3. Press button front, water comes from aerator. 4.
PAGE 8