Specification

INSTALLATION GUIDE
5
STEP 6
6. Remove the aerator with an aerator
wrench (a quarter or flat surface tool
could also work). Turn the faucet
handle all the way on, turn on the hot
and cold water supply and flush water
lines for one minute. Reinstall the
aerator with an aerator wrench.
STEP 5
5. From the top of the drain hole,place
the drain through the installation
hole. From under the drain hole,
install the thick washer ,washer
and nut by hand twisting on to the
tail pipe of the drain. Then, install the
tail pipe to the wall plumbing.Use of
plumbers putty or silicone is
recommended to seal drain to top
side of bowl.
1
2
3
4