Specification

INSTALLATION GUIDE
STEP 3
STEP 4
4
1
8
13
7
16
3. Connect the “quick connect” hose (# )
to the handle (#1 and #13) and faucet
body (#8). You will hear a “click” when
it has been successfully connected.
Use the provided clamps (#7) to secure
the ends of the “quick connect” hose.
16
HOT
COLD
7
4.Connect the water supply lines to
the bottom ends of the “quick connect”
hose (#7) and to the hot and cold water
supply valves. Secure and tighten with
an adjustable wrench.
Caution: Be careful not to mix up the
hot and cold supply lines.
Check all connections (shown with
arrows in the image) for leaks.
Re-tighten if necessary. Do not over
tighten!