Installation Guide

INSTALLATION MANUAL
2. Apply clear silicone to the rim of the
undermount sink.
3. Use supplied clips or your own preferred
clamping system to secure the sink to the
underside of the countertop opening. Make
sure it is accurately aligned to the cutout
opening.
UNDERMOUNT
SINK
2. Draw a line 1/4” inside of the outline of the
sink.
3. Use the appropriate saw to cut on the inside
line.
4. Apply silicone around cutout in the
countertop surface. Lower sink into position.
Place weight in sink for 24 hours while silicone
cures.
TOP MOUNT
SINK
1. Locate the sink upside down in the most
suitable position on the countertop. Trace
around the perimeter of the sink with pencil.
4. Wipe up excess silicone.
1. Use the template provided or the DXF file
to create the cutout in the countertop. It is
recommended to have a 1/8” to 1/4”
overhang.
Epoxy (not
included)