Installation Guide

INSPIRED FOR LIVING

CINOX COLLECTION INSTALLATION MANUAL

Silicone

1. Locate the pedestal sink in the most

suitable location.

1. Place the vessel sink on the

countertop and mark the position

of the waste.

2. Drill the waste hole with suitable tools

according to the countertop material.

3. Apply clear silicone around the bottom of

the sink.

4. Install the waste to the sink.

2. Mark the screw holes on the ﬂoor.

3. Drill starter holes for the screws. Install the

waste and attach plumbing to sink prior to the

next step.

4. Apply a clear silicone to base of sink. Place

in correct position and fasten screws.

5. Connect the plumbing to the wall

connection.

VESSEL

SINK

PEDESTAL

SINK

4”

PAGE 1
INSPIRED FOR LIVING INSTALLATION MANUAL CINOX COLLECTION 1. Locate the pedestal sink in the most suitable location. 2. Mark the screw holes on the ﬂoor. PEDESTAL SINK 4” 3. Drill starter holes for the screws. Install the waste and attach plumbing to sink prior to the next step. VESSEL SINK 3. Apply clear silicone around the bottom of the sink. Silicone 4. Apply a clear silicone to base of sink. Place in correct position and fasten screws. 5. Connect the plumbing to the wall connection. 1.
PAGE 2
INSTALLATION MANUAL 1. Use the template provided or the DXF ﬁle to create the cutout in the countertop. It is recommended to have a 1/8” to 1/4” overhang. 2. Apply clear silicone to the rim of the undermount sink. UNDERMOUNT SINK 3. Use supplied clips or your own preferred clamping system to secure the sink to the underside of the countertop opening. Make sure it is accurately aligned to the cutout opening. 4. Wipe up excess silicone. Epoxy (not included) 1.